Common Furnace Operation Concerns

Common Furnace Operation Concerns

When the temperatures outdoors have dipped to chilly levels, the last thing you want to deal with is a furnace that’s not operating properly. There can be many reasons as to why your furnace is not running or is failing to produce heat, and if you’re not a trained furnace repair technician, you might not know where to start troubleshooting if this happens to you. Today, we’ll take a look at a few of the most common operational concerns and review a few easy troubleshooting tasks you can complete yourself.

If you have found yourself with a non-operational furnace this winter and have been unable to determine the cause for yourself, the furnace repair experts at Arthur Hagar Air Conditioning & Heating are here to help! Get a Speedy Fast™ Quote on a new furnace or a service call online today or call us at 817-478-1122!

Benefits of Professional Furnace Repair

There are many reasons to rely on a professional for furnace repair tasks. When you rely on a trained technician, you’ll get the benefit of financial savings, safety, efficiency, and knowledge.

  • Cost Savings — It might seem more cost effective to perform your own repairs, however, remember that the work completed by a professional HVAC company will come with a warranty, saving you on any type of rework or additional repairs needed for the same issue down the road.
  • SafetyFurnaces are complex pieces of equipment that may have several dangerous components. Additionally, if you perform the repairs yourself, the likelihood for fire, explosion, or dangerous gas or carbon monoxide leaks increases exponentially.
  • Fast Repairs — Have you ever started a home improvement project only to discover it took you much longer than expected? Furnace repairs have the potential of bringing on that frustration if you’re not properly trained, but professional HVAC technicians can be in and out in no time.
  • Knowledge and Experience — When you rely on a properly trained furnace repair tech, he or she will have the knowledge and experience necessary to get the job done properly. Additionally, he or she will be able to provide well-founded recommendations for repairs and/or replacements as needed.

At Arthur Hagar Air Conditioning and Heating, we understand that your safety and budget are very important. Our furnace repair experts will complete safe, quick, and affordable repairs based on more than 60 years of experience. Call 817-478-1122 to schedule a service call!

Three Reasons Your Furnace Might Not be Heating

There is no convenient time for your furnace to stop running, and if you have ever found yourself in this situation, you know how frustrating it can be to be without heat. There are several common furnace operational concerns, such as not turning on, not producing heat, and inadequate cycle times. We’ll review each of these below.

Failure to Operate

If you notice your indoor temperature dropping or that the air in your home is colder than usual when you return home from work, there is a potential that your furnace has failed to turn on. In this instance, it is best to check your thermostat first to ensure that it is set to the right temperature. If you have a programmable thermostat, it may be necessary to check the program settings to ensure they haven’t been altered for some reason.

If all appears well with your thermostat, you’ll want to make sure that your furnace isn’t turned off for some reason. There is also the potential that the circuit has been tripped, and you may need to reset the breaker to remedy the issue. If your furnace is still without power after checking all of these things, it may be time to call in a professional furnace repair technician to further inspect and diagnose the problem.

No Heat Production

For some homeowners, the problem is not lack of power, but rather, lack of heat. If you hear your furnace turning on but there is no warm air coming out of your vents, the first thing you want to do is check your thermostat to ensure it is set to the correct mode. If your thermostat is set properly, the problem likely has something to do with the heating components of your furnace.

First, check to ensure your pilot light is lit. Even if it is lit, there could be an issue with the gas supply to the furnace. If you have a gas water heater, check to see if it is operating properly. If it is, you can rule out any type of fuel supply problem. You can also check your filters, as dirty filters will often cause your furnace to blow cool air as it operates less efficiently. If you are unable to find the source of the problem, a well-qualified furnace service technician can help.

Frequent Cycling

Another common operational concern has to do with how frequently your furnace cycles. A furnace that cycles too frequently is not operating as efficiently as it should be, and this can cause your heating bill to skyrocket if left unchecked. If it seems like your furnace is constantly turning on and off but the air in your home is not getting any warmer, there are a couple of potential causes for the issue.

If you check the air filter in your furnace and discover that it is excessively dirty, this could be the source of the problem and the production of air flow could be limited. Additionally, there is a possibility that there could be holes, gaps, or other openings in your ducts that is directing heated air elsewhere. A trained furnace repair technician will be able to diagnose if one of these issues is the likely culprit, or if the frequent cycling is due to an issues with the furnaces safety features.

Fort Worth Furnace Repair

Do you have a furnace that is not operating properly? If you’re a resident of the Fort Worth area, Arthur Hagar Air Conditioning & Heating is here to help you with your furnace repair and replacement needs. We are licensed, bonded, and insured, and we are a Carrier Factory Authorized Dealer, so you know you can rely on quality service and products from our team of experts. Call 817-478-1122 today to get started!


Arthur Hagar Air Conditioning & Heating BBB Business Review
5 Stars (5 / 5)
stars - based on 5 reviews

Contact Us

5020 SE LOOP 820
Phone: 817-478-1122
License # TACLB12063E
URL of Map
Copyright © 2016 - Arthur Hagar Air Conditioning & Heating